JLG 3246ES Operator Manual - Manual (Page 24)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION & INSPECTION
2-4 – JLG Lift – 3121165
Function Check
Perform the Function Check as follows:
1. From the ground control console with no load in the
platform:
a. Check that all guards protecting the function con-
trol switches and controllers are in place.
b. Operate all functions and check all limiting and
cutout switches.
c. Check manual descent.
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is depressed.
2. From the platform control console:
a. Ensure that the control console is firmly secured
in the proper location.
b. Check that all guards protecting the function con-
trol switches and controllers are in place.
c. Operate all functions and check all limiting and
cutout switches.
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is depressed.
3. With the platform in the transport (stowed) position:
a. Drive the machine on a grade, not to exceed the
rated gradeability, and stop to ensure the brakes
hold.
b. Check the tilt indicator light to ensure proper
operation. The light should be illuminated when
tilted.