JLG 3246ES Operator Manual - Manual (Page 60)

SECTION 4 - MACHINE OPERATION
4-10 – JLG Lift – 3121165
4.8 PLATFORM LOADING
The platform maximum rated load capacity is shown on a plac-
ard located on the platform and is based upon the following cri-
teria:
1. The machine is positioned on a firm, uniform surface.
2. All braking devices are engaged.
3. Refer to Section 6 for the maximum platform capacity.
NOTE: It is important to remember that the load should be
evenly distributed on the platform. The load should be
placed near the center of the platform when possible.
4.9 SAFETY PROP
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE PERFORMED
ON THE MACHINE REQUIRES THE SCISSOR ARMS TO BE RAISED AND ONLY
WITH NO LOAD IN THE PLATFORM.
To engage the safety prop, raise the platform, swing the safety
prop from it’s stowed position located on the right side of the
machine. Lower the platform until the safety prop rests on the
designated safety prop rest.
To store the safety prop, raise the platform, swing the safety
prop around and restore it back to its stowed position.