JLG 3246ES Operator Manual - Manual (Page 81)

SECTION 4 - MACHINE OPERATION
3121165 – JLG Lift – 4-31
6-6 Communication
DTC FAULT MESSAGE DESCRIPTION CHECK
661 CANBUS FAILURE - POWER MODULE The control system failed to receive mes-
sages from the power module. Refer problem to a qualified JLG mechanic.
662 CANBUS FAILURE - PLATFORM MOD-
ULE In platform mode, the control system
failed to receive messages from the plat-
form board. Refer problem to a qualified JLG mechanic.
663 CANBUS FAILURE - LOAD SENSING
SYSTEM MODULE With load sensing system enabled, the
control system failed to receive messages
from the load sensing system module. Refer problem to a qualified JLG mechanic.
664 CANBUS FAILURE - ACCESSORY MOD-
ULE An accessory module has stopped commu-
nication. • See accessory module documentation for troubleshooting.
Refer problem to a qualified JLG mechanic.
6635 CANBUS FAILURE - CHASSIS TILT SEN-
SOR
Machine control system lost communica-
tion with the machines’ tilt sensor. Refer problem to a qualified JLG mechanic.
6-7 Accessory
DTC FAULT MESSAGE DESCRIPTION CHECK
671 ACCESSORY FAULT An accessory module is reporting a fault. • See accessory module documentation for troubleshooting.
Refer problem to a qualified JLG mechanic.