JLG 601S Service Manual - Manual (Page 206)

SECTION 6 - JLG CONTROL SYSTEM (ADE)
6-30 – JLG Lift – 3120866
9
(Jib) 0
1
2 No JIB installed.
JIB installed which has up and down movements only.
JIB installed which has up and down movements and side to side movements. 0
10
(4WS) 0
1 No Four-Wheel Steer installed.
Yes 0
11
(Soft Touch System) 0
1 No Soft Touch System Installed
Yes 0
12
(Generator/Welder) 0
1
2 No Generator Installed
Yes - 2500W or 7500W generator installed
Yes - Welder Installed 0
13
(Head and Tail Lights) 0
1 No Head and Tail Lights Installed
Yes 0
14
(Broken Cable
Switch Installed) 0
1 No Broken Cable Switch Installed
Yes 0
15
(Load Sensor) 0
1
2
3
No Load Sensor installed - (DOM - STD)
Functions in Creep, Overload Lamp Lit, Platform Alarm Beeps Continuously
All functions cutout, flash overload light (500mS on, 500mS off), Platform Alarm beeps (5
sec on, 55 sec off, 5 sec on) - (CE-STD)
Functions in Creep, Overload Lamp Lit, Platform Alarm beeps continuously, disable
upper telescope out and upper lift up 0
16
(Angle Sensor) 1 Digital Angle Sensor Installed 1
17
(Length Sensor) 1 Digital Length Sensor Installed 1
18
(Function
Cutout) 0
1
2
3 No Drive Cutout - (DOM - STD)
Boom function cutout while driving above elevation - (CE - STD)
Drive Cutout above elevation
Drive Cutout above elevation and tilted 0
19
(Ground Alarm) 0
1
2
3 No ground alarm installed.
Travel alarm- Sounds when the drive function is active. Option
Descent Alarm- Sounds when either lift down is active. Option
Motion alarm- Sounds when any function is active. Option 0
20
(Tower Prox Switches) 0
1 No Tower Prox Switches Installed
Tower Prox Switches Installed
450A, 510, 600A, 800A
0
21
(Flywheel Teeth) 0
1 133 Teeth (F3M Prior to 11-16-01; F4M1011 Prior to 1-1-02)
110 Teeth (Deutz 2011, F3M after 11-16-01; F4M1011 after 1-1-02 0
22
(Oscillating Axle) 0
1 No - Oscillating axle installed
Yes - Oscillating axle installed 0
4150364 - 6
Table 6-4. Machine Configuration Programming Information
Configuration Digit Number Description Default Number