JLG LiftPOD FS80 (1001070465) - Manual (Page 37)

SECTION 3 - MACHINE OPERATION
LIFTPOD by JLG 1001070465
www.liftpod.com 3-9
8. Place the powerpack (optional equipment) against the
platform uprights, closest to the mast, and slide it down
until it clicks, indicating it is fully seated (see Figure 3-
12.).
NOTE: When reversing the procedure to disassemble the
machine, pull the powerpack release latch (see Figure 3-
19.) while lifting to disengage the powerpack from the
platform.
9. Tool tray: (optional equipment)
Place on top rail of platform, and fasten the two clips
firmly around the rail (see Figure 2-9.).
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLATFORM
MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPACITY. SEE
TABLE 5-4.
DO NOT PLACE ITEMS IN THE TOOL TRAY IN THE INDICATED AREA
WHEN MAST IS BELOW THE TOOL TRAY’S TOP SURFACE (SEE FIGURE
3-13.).
Figure 3-12. Powerpack positioned and latched into
place