JLG 3246E2 Operator Manual - Manual (Page 14)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-2 – JLG Lift – 3120854
2.2 PREPARATION, INSPECTION, AND
MAINTENANCE
The following table covers the periodic machine inspec-
tions and maintenance recommended by JLG Industries,
Inc. Consult local regulations for further requirements for
aerial work platforms. The frequency of inspections and
maintenance must be increased as necessary when the
machine is used in a harsh or hostile environment, if the
machine is used with increased frequency, or if the
machine is used in a severe manner.
Table 2-1.Inspection and Maintenance Table
Type Frequency
Primary
Responsibility
Service
Qualification
Reference
P r e - S t a r t
Inspection Before using each day; or
whenever there’s an Operator change. User or Operator User or Operator O p e r a t o r a n d S a f e t y
Manual
P r e - D e l i v e r y
I n s p e c t i o n
(See Note) Before each sale, lease, or rental delivery. Owner, Dealer, or
User Q u a l i f i e d J L G
Mechanic S e r v i c e a n d M a i n t e -
nance Manual and appli-
c a ble JL G i ns p ect i on
form
F r e q u e n t
Inspection In service for 3 months or 150 hours,
whichever comes first; or
Out of service for a period of more than 3
months; or
Purchased used.
Owner, Dealer, or
User Q u a l i f i e d J L G
Mechanic S e r v i c e a n d M a i n t e -
nance Manual and appli-
c a ble JL G i ns p ect i on
form
A n n u a l
M a c h i n e
Inspection Annually, no later than 13 months from the
date of prior inspection. Owner, Dealer, or
User Factory-Certified
Service Techni-
cian* S e r v i c e a n d M a i n t e -
nance Manual and appli-
c a ble JL G i ns p ect i on
form
P r e v e n t a t i v e
Maintenance At intervals as specified in the Service and
Maintenance Manual. Owner, Dealer, or
User Q u a l i f i e d J L G
Mechanic S e r v i c e a n d M a i n t e -
nance Manual
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
* JLG Industries, Inc. recognizes a Factory-Certified Service Technician as a person who has successfully completed the JLG Service
Training School for the specific JLG product model.