Section 4. machine operation, 1 description, Section 4 - machine operation – JLG 3246E2 Operator Manual User Manual
Page 37: Description -1, Operating specifications (ce and australian) -1
SECTION 4 - MACHINE OPERATION
3120854
– JLG Lift –
4-1
SECTION 4. MACHINE OPERATION
4.1
DESCRIPTION
This machine is a self-propelled hydraulic lift equipped
with a work platform on an elevating scissor mechanism.
Vibrations emitted by these machines are not hazardous
to an operator in the work platform. The equivalent contin-
uous A-Weighted sound pressure level at the work plat-
form is less than 70 dB(A).
The primary operator control station is in the platform.
From this control station, the operator can drive and steer
the machine in both forward and reverse directions. The
machine has a Ground Control Station which will override
the Platform Control Station. Ground Controls operate lift
and lower and are to be used in an emergency to lower
the platform to the ground should the operator in the plat-
form be unable to do so. Ground Control is also to be
used in Pre-Start Inspection.
Table 4-1. Operating Specifications (CE and Australian)
MODEL
1932E2
2032E2
2632E2 (Aust Only)
2646E2
3246E2
Maximum Work Load (Capacity)
Extension Only:
230 kg
120 kg
340 kg
120 kg
230 kg
120 kg
340 kg
120 kg
320 kg
120 kg
Maximum Occupants
Extension Only
2
persons +
70 kg
1
person +
40kg
2
persons +
180 kg
1
person +
40kg
2
persons +
70 kg
1
person +
40kg
2
persons +
180 kg
1
person +
40kg
2
persons +
155 kg
1
person +
40kg
Maximum Travel Grade (Gradeability)
20% / 11.3 °
25% / 14 ° 20%
/
11.3
°
25% / 14 °
25% / 14 °
Maximum Travel Grade (Sideslope)
1.5°
1.5°
2°
2°
2°
Maximum Platform Height
5.8 m
6.1 m
7.9 m
7.9 m
9.75 m
Maximum Tire Load
Reference Decal on Machine
Maximum Travel Speed
4.0 kmh
4.2 kmh
3.6 kmh
3.6 kmh
3.6 kmh
Maximum Allowable Wind Speed (CE)
12.5 m/s
12.5 m/s
N/A
12.5 m/s
12.5 m/s
Maximum Allowable Wind Speed (Aust)
8 m/s
8 m/s
8 m/s
8 m/s
8 m/s
Maximum Manual Force
450 N
500 N
450N
500 N
465 N
Inside Turning Radius
0.5 m
1.0 m
1.0 m
1.0 m
1.1 m
Maximum Hydraulic System Pressure
207 Bar
Electrical System Voltage
24 Volt
Gross Machine Weight (Platform
Empty)
1360 kg
2091 kg
2415 kg
2086 kg
2804kg