JLG T500J Operator Manual - Manual (Page 126)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7-22 – JLG Lift – 3121197
Unsealed Wheel Bearings (Hubs)
If your trailer has unsealed axle bearings, they must be inspected
and lubricated once a year or 12,000 miles to insure safe opera-
tion of your trailer.
If a trailer wheel bearing is immersed in water, it must be
replaced.
If your trailer has not been used for an extended amount of time,
have the bearings inspected and packed more frequently, at least
every six months and prior to use.
7.5 SUPPLEMENTAL INFORMATION
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 104 dB.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s 2 . The highest root mean square
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s 2 .