JLG T500J Operator Manual - Manual (Page 115)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121197 – JLG Lift – 7-11
4. Swing Bearing
Lube Point(s) - 1 Grease Fitting
Capacity - As Required
Lube - MPG
Interval - Every month or 50 hours
Comments - Rotate the bearing back and forth
to ensure grease is distributed evenly the whole
way around the bearing.
5. Swing Bearing Teeth
Lube Point(s) - Spray On
Capacity - As Required
Lube - OGL
Interval - Every month or 50 hours
Comments - More frequent lubrication intervals may
be required.
6. Swing Drive
Lube Point(s) - 2 Grease Fittings
Capacity - As Required
Lube - MPG
Interval - As Required
DO NOT OVERGREASE BEARINGS. OVERGREASING BEARINGS WILL RESULT IN BLOW-
ING OUTER SEALS IN HOUSING.