JLG T500J Operator Manual - Manual (Page 69)

SECTION 5 - MACHINE OPERATION
3121197 – JLG Lift – 5-15
5.11 PLATFORM REMOVAL & INSTALLATION
1. Disconnect the platform control box harness at the platform
support.
NOTE: The standard platform assembly weighs approximately 75 lbs.
(34 kg). If equipped with the optional rotator, the platform
assembly weighs approximately 150 lbs. (68 kg).
2. Remove the hitch pin and gravity pin securing the platform
assembly to the platform support and remove the platform.
3. To install the platform, repeat steps 1 and 2 in reverse order.