JLG T500J Operator Manual - Manual (Page 70)

SECTION 5 - MACHINE OPERATION
5-16 – JLG Lift – 3121197
5.12 MATERIAL HOOK INSTALLATION
OPERATE THE MATERIAL HOOK FROM THE REMOTE CONSOLE ONLY, DO NOT USE THE
GROUND CONTROLS.
1. Disconnect the platform control box harness at the platform
support.
2. Remove the hitch pin and gravity pin securing the platform
assembly to the platform support and remove the platform.
3. Remove the material hook from the storage position on the
turntable.
4. Place the hook in position on the platform support.