JLG 260MRT ANSI Parts Manual - Manual (Page 119)

3121109 260MRT 5-9
SECTION 5 CYLINDER
FIGURE 5-4. LIFT CYLINDER COMPONENTS ASSEMBLY
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. LIFT CYLINDER SUB-ASSEMBLY
0259865 Ref. Prior to S/N 0200112688 J
0273069 Ref. S/N 0200112688 to Present A
1 to 9 Not Used
10 0080228 1 Adaptor, Cable
11 Not Used
12 0641506 2 Bolt 5/16in-18NC x 3/4in
13 to 22 Not Used
23 1060818 1 Cable, Manual Descent
24 0902421 1 Bracket, Cable Mounting
25 to 26 Not Used
27 3321402 2 Jamnut 1/4in-28NF
28 to 35 Not Used
36 3450405 1 Pin, Cotter
37 to 40 Not Used
41 4641172 1 Valve, Solenoid
42 4641104 1 Valve, Restrictor/Check
43 4711400 2 Flatwasher 1/4in Thin
44 to 54 Not Used
55 2220371 1 Fitting
56 2220473 1 Fitting
57 2752622 1 Hose 3/8in (168in Long)
58 2753398 1 Hose 3/8in (134in Long)
Ref. LIFT CYLINDER ASSEMBLY
1683887 Ref. Standard Machines B
9884263 Ref. Machines with 20ft Limit B
101 Use Item 151 1 Seal
102 Use Item 151 1 Seal
103 Use Item 151 1 O-Ring
104 Use Item 151 1 Back-Up
105 Use Item 151 1 O-Ring
106 Use Item 151 1 Wiper
107 Use Item 151 1 O-Ring
108 Use Item 151 1 Ring, Wear
109 Use Item 151 2 Ring, Wear
110 Not Used
111 7003226 1 Locknut
112 to 114 Not Required
115 0962012 4 Bushing
116 7019882 1 Barrel
117 7019881 1 Rod
118 7017387 1 Head
119 7019880 1 Piston
120 1 Spacer Options:
7019879 Standard Machines
4220273 Machines with 20ft Limit