JLG G6-42A Operator Manual - Manual (Page 52)

2 2
4
2 2 3
2
5 5 1 4
1 1 1
6
7
8
27
6
27
11
10
15
13
14 16
17
18
19
20
21
22
23
24
10
7
8
6
6
9
36
35
37
29
30
12
35
33
32
31
31
28
38
39
9114-3282 STAY CLEAR OF PINCH POINT AREA ANYTIME ENGINE IS RUNNING. BEING IN PINCH POINT AREA COULD CAUSE SERIOUS INJURY OR DEATH.
9114-3282 STAY CLEAR OF PINCH POINT AREA ANYTIME ENGINE IS RUNNING. BEING IN PINCH POINT AREA COULD CAUSE SERIOUS INJURY OR DEATH. DO NOT GO NEAR LEAKS C 10814B * High pressure oil easily punctures skin causing serious injury, gangrene or death. * If injured, seek emergency medical help. Immediate surgery is required to remove oil. * Do not use finger or skin to check for leaks. * Lower load or relieve hydraulic pressure before loosening fittings.
9114-3283 NO RIDERS PERMITTED ON HANDLER. OPERATOR ONLY IN MACHINE WHILE RUNNING. RIDERS COULD FALL OFF MACHINE CAUSING SERIOUS INJURY OR DEATH.
9114-3286 DIESEL FUEL IS FLAMMABLE EXTINGUISH ALL OPEN FLAME AND SMOKING MATERIALS WHEN REFUELING INJURY OR DEATH COULD RESULT FROM FIRE. ** unknown ** ** unknown ** 2 NO 1 R
7733-3027
LUBRICATION & ROUTINE MAINTENANCE
17.1
LUBRICATION NOTICE
• After greasing machine, cycle all functions several times to distribute lubricants. Perform this maintenance
procedure without attachment or forks installed.
• Apply a light coating of engine oil to all linkage pivot points.
• Clean lubrication fittings before lubricating.
• Intervals shown are for normal (8-hour day) usage and conditions. Adjust intervals for abnormal usage and conditions.
• Drain engine and gear cases after operating when oil is hot.
• Check lubricant levels when lubricant is cool. For ease of filling hydraulic reservoir, use a funnel with a hose or
flexible tube for best results.
• Clean filter and air cleaner housing and reusable elements using solvent or diesel fuel. Dry components thoroughly
using lint free cloth.
IMPORTANT NOTICE
Be certain to check extend chain
adjustment every 5 weeks or 250
hours and adjust as required. Chain
damage can occur if chain is not
adjusted properly.
F AILURE T O U SE G RADALL
H YDRAULIC F ILTER E LEMENTS
C OULD V OID W ARRANTY
SYMBOLS
= Lube Fitting
= Other Service
= Service Both Sides
•
Lubrication Symbols
DF - DIESEL FUEL
EO - ENGINE FUEL
HF - HYDRAULIC FLUID
HM - MOLY LUBE (extreme pressure)