JLG 45e ANSI Service Manual - Manual (Page 11)

SECTION 1 - SPECIFICATIONS
3120743 – JLG Lift – 1-3
Up and Over Platform Height.
30 electric - 16 ft.,7.0 in. (5.05 m.).
35/n35 electric - 17 ft.,11.0 in. (5.46 m.).
40/n40 electric - 20 ft.,0 in. (6.10 m.).
45 electric - 24 ft.,7 in. (7.49 m.).
Horizontal Reach Up and Over.
30 electric - 13 ft.,5.0 in. (4.09 m.).
35/n35 electric - 20 ft.,6.0 in. (6.25 m.).
40/n40 electric - 20 ft.,6.0 in. (6.25 m.).
45 electric - 22 ft. 8 in.,(6.91 m.).
Machine Width.
30 electric - 5 ft.,9 in. (1.75 m.).
35 electric - 5 ft.,9 in. (1.75 m.).
n35 electric - 4 ft.,11 in. (1.50 m.).
40 electric - 5 ft.,9 in. (1.75 m.).
n40 electric - 4 ft.,11 in. (1.50 m.).
45 electric - 5 ft.,9 in. (1.75 m.).
Wheel Base.
30 electric - 6 ft., 4 in. (1.93 m.).
35/n35 electric - 6 ft., 7.25 in. (2.01 m.).
40/n40 electric - 6 ft., 7.25 in. (2.01 m.).
45 electric - 6 ft., 7.25 in. (2.01 m.).
Working Height.
30 electric - 30 ft., 0 in. (9.14 m.).
35/n35 electric - 35 ft., 0 in. (10.67 m.).
40/n40 electric - 40 ft., 0 in. (12.19 m.).
45 electric - 45 ft., 0 in. (13.72 m.).
1.4 TORQUE SPECIFICATIONS.
NOTE: *Check swing bearing bolts for security after first 50
hours of operation and every 600 hours thereafter.
(See paragraph 2-16, - Swing Bearing.)
NOTE: ***Torque in cross pattern. Foam filled or solid tires
may require more frequent torque intervals.
NOTE: When maintenance becomes necessary or a fas-
tener has loosened, refer to the Torque Chart, Figure
1-1, to determine proper torque value.
Table 1-1.Torque specifications
Description
Torque Value
(Dry)
Interval Hours
A. Bearing To
Chassis
See Note 50/600*
B. Bearing To
Turntable
See Note 50/600*
C. Wheel Bolts 90 ft. lb.
(122 Nm)
150***