JLG 2505H Operator Manual - Manual (Page 126)

Section 7 - Lubrication and Maintenance
7-16 31200743
Engine Cooling System
A. Engine Coolant Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open the engine cover.
3. Check coolant level in surge tank (1). When coolant is hot, the tank should be
1/2 to 3/4 full. When coolant is cool, bottle should be 1/4 to 1/2 full.
4. If coolant is low, allow fluid to cool.
5. Remove surge tank cap (2) slowly. Add coolant as required.
6. Replace overflow bottle cap.
7. Close and secure the engine cover.
50
OW0980 OW1070
OAH2190
1
2