JLG 2505H Operator Manual - Manual (Page 52)

Section 3 - Controls and Indicators
3-12 31200743
Instrument Panel
1. Turn Signal Indicator (if equipped): Illuminates when turn signal is active.
2. High Beam Indicator (if equipped): Illuminates when high beam lights are on.
3. Check Engine Indicator: Illuminates when maintenance is required. See Service
Manual for details.
4. Low Fuel Indicator: Illuminates when fuel level is low.
5. Fuel Gauge: Indicates amount of fuel in fuel tank.
6. Engine Warning Indicator: Illuminates when engine is in a critical state.
Determine cause and correct before continued use.
7. Engine Pre-Heat Indicator: Illuminates with ignition key in position P. Light goes
out when start temperature has been reached.
8. Steer Mode Indicators: Illuminates active steering mode.
9. System Distress Indicator: Illuminates when an issue with the fuel level or
machine system is present. Flashes when an issue with the machine charge
system is present.
10. Park Brake Indicator: Illuminates when park brake is applied.
NOTICE
EQUIPMENT DAMAGE. When a red indicator illuminates (except park brake),
immediately bring machine to a stop, lower boom and attachment to ground and
stop the engine. Determine cause and correct before continued use.
OAH2122
1
2
10 KPH
127° F 1127 RPM
3
5
6
7
8
13
9
10
11 12
4
10 KPH
127° F 1127 RPM