JLG 2505H Operator Manual - Manual (Page 89)

Section 5 - Attachments and Hitches
5-13 31200743
This installation procedure is designed for one-person operation. Prior to exiting cab,
perform “Shut-Down Procedure” on page 4-3.
1. Tilt quick attach forward to provide clearance.
Check to be sure lock pin handles and pins are
pulled up.
2. Align engaging edge with recess in attachment.
Raise boom slightly to engage edge in recess.
3. Tilt quick attach back to engage attachment.
4. Lower lock pin handles to engage lock pins.
5. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-14.
OAL1880
OAL1890
OAL1900
OAL1910