JLG 2505H Operator Manual - Manual (Page 121)

Section 7 - Lubrication and Maintenance
7-11 31200743
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Check level of hydraulic oil at the sight gauge (5) on the frame. The oil level
should be visible in the gauge window.
3. If hydraulic oil is low, remove oil fill cap (6) from filler neck. Add hydraulic fluid to
bring oil up to the upper mark on the sight gauge.
4. Replace hydraulic oil fill cap.
10
OW0970
OW1030
OAH2170
6
5