Lsi override switch (2505h), Lsi override switch (2505h) -10, Warning – JLG 2505H Operator Manual User Manual
Page 50
Advertising

Section 3 - Controls and Indicators
3-10
31200743
LSI Override Switch (2505H)
The LSI override switch (1) momentarily disables the automatic function cut-out.
• Depress and hold top of switch up to 30 seconds while operating joystick to
momentarily disable the automatic function cut-out.
• Release switch to re-enable the automatic function cut-out.
WARNING
TIP OVER HAZARD. Exceeding lift capacity of the telehandler could damage the
equipment and/or cause tip over.
OAL1332
1
Advertising
This manual is related to the following products: