JLG 2505H Operator Manual - Manual (Page 58)

Section 3 - Controls and Indicators
3-18 31200743
Accessory Control Lever (if equipped)
The accessory control lever (1) enables the work lights and operates the turn
signals, parking lights and headlights.
Turn Signals
• Push the lever forward (2) to activate the left turn signal.
• Pull the lever back (3) to activate the right turn signal.
• The lever must be manually returned to the center position to deactivate either
turn signal. The lever will not cancel automatically after a turn.
Parking Lights, Headlights and Work Lights
• Turn the twist grip (4) of the lever counterclockwise to the first position (5) to turn
on the parking lights and enable the work light switches (8).
• Turn the twist grip to the second position (6) to turn on the headlights.
• Raise/lower the lever to switch between low and high beam.
• Turn the twist grip clockwise to the OFF position (7) to turn all lights off.
OAL1303
2
3
7
5
6 4
1
8