JLG 2505H Operator Manual - Manual (Page 94)

Section 5 - Attachments and Hitches
5-18 31200743
Carriage with Forks
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
The joystick (1) controls lift/lower and the extend/retract movement of the boom.
The tilt button (2) enables fork tilt.
• While pressing and holding button move joystick left to tilt up.
• While pressing and holding button move joystick right to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-9.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
OY0690
OAL1601
1
2