Binatone SYMPHONY 2210 - Manual (Page 10)

Installation and set-up
The CHARGE
light comes
on
The bars on the
battery level symbol
continuously change
as the batteries are
being charged
Make sure the mains socket is
switched on — the phone won’t
work without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket. Insert the
telephone line plug into the socket Switch mains 8
NOTE: the charger
Charge the batteries 7
Before you use the cordless
for the first time,
it’s important to charge
You hear a ‘beep’ when
charging cradle.
To keep the batteries charged,
whenever you don’t need to use the handset
(such as overnight, or when you go out), leave
it on the base unit or charger pod.
Leave the handsets on the
Fit the batteries in the cordless handsets 6
batteries as shown
Color profile: Generic CMYK printer profile
Composite Default screen
for 15 hours
power back on
base unit
a nd charger pod(s) for 15 hours.
pod doesn't have
a connection to the
telephone line.
A.Insert the three rechargeable
the batteries fully.
the handset is correctly placed on the
B.Fit the battery compartment
cover, sliding it into place and
pressing firmly to make sure
it is secure.
handsets
5 Switch on at the mains socket(s)
Binatone Help Line: 0845 345 9677 (Local Call rate) 6
DON'T use non-rechargeable batteries in the
handset -t hey may bur st , causing damage. Use
the rechargeable batteries supplied (1.2V AAA
size 300mAh NiCd or 550mAh NiMH).
-
-
+
+
+ -