Binatone SYMPHONY 2210 - Manual (Page 52)

“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the
Last
Number Redial button until a P appears on the display.
This inserts a pause between the access code and the
telephone number. You should later be able to redial
the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press and hold
the
Last Number Redial button for a pause
between the access code and the number.
If the fault persists …
Disconnect all other instruments connected to the
same line as the Symphony 2210 and see whether you
Disconnect the base unit from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider.
If you still cannot identify the cause of the problem,
contact the Help Line on
.
Troubleshooting
Color profile: Disabled
Composite Default screen
0845 345 9677
Binatone Help Line: 0845 345 9677 (Local Call rate) 48
can make a call.