Binatone SYMPHONY 2210 - Manual (Page 8)

Read these notes first
Before you install your Symphony 2210 —
Choosing a site
for the base
unit telephone
and charger
pod The base unit and charger pod(s) should be placed on a
level surface, in a position where:
■
the mains adapter plug will reach an easily accessible
230-V ACswitched mains supply socket — never try
to lengthen the mains power cable
■ the base unit’s telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■ it is not close to another telephone - this can cause
radio interference
■ it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■ it is not close to other electrical equipment - fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
between
handset and
base unit To use your cordless handset and base unit together,
you must be able to establish a radio link between
them. Be aware that:
■
Any large metal object
or a filing cabinet - between the handset and the
base unit telephone may block the radio signal.
■ Other solid structures , like walls, may reduce the
signal strength.
Mains power
connection IMPORTANT
charger pod must be used with the mains adapters
supplied. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
Color profile: Generic CMYK printer profile
Composite Default screen
- like a refrigerator, a mirror
- The Symphony 2210 base unit and
Binatone Help Line: 0845 345 9677 (Local Call rate) 4