JLG 45e Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3120861 – JLG Lift – 1-7
1.10 SERIAL NUMBER LOCATIONS.
(SEE FIGURE 1-3)
Model 30/35/n35 electric.
For machine identification, a serial number plate is affixed
to the turntable, facing the platform basket. If the serial
number plate is damaged or missing, the machine serial
number is stamped on the top left side of the frame and
the top left side of the turntable. In addition, the serial
number is stamped on top of the end of the upper boom
at the platform, and lower boom at the upright.
Model 40/n40/45 electric.
For machine identification, a serial number plate is affixed
to the left rear of frame, in front of left rear wheel. If the
serial number plate is damaged or missing, the machine
serial number is stamped on the top left side of the frame
and the top left side of the turntable. In addition, the serial
number is stamped on top of the end of the upper boom,
mid boom, and lower boom at the left rear of the booms.