BenQ MP610 - Manual (Page 47)

Maintenance 41
Indicators
Illustration
•
Blank - : Light OFF
• O : Orange light
• : Light flashing • R : Red light
• : Light ON • G : Green light
Light Status & Description
Power Temp Lamp
Power events
- -
Stand-by mode.
- -
The Power indicator light is flashing during powering up.
- -
The projector is under normal operation.
- -
1. The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process. Or
2. The projector needs to cool for 90 seconds after the
power is turned off.
- -
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
Light Status & Description
Power Temp Lamp
Lamp events
-
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
- -
1. The projector needs 90 seconds to cool down. Or
2. Please contact your dealer for assistance.
O
G
G
O
O
O R
R