JLG 450A_AJ Series II Parts Manual - Manual (Page 141)

3121243 450A & 450AJ Series II 2-63
SECTION 2 TURNTABLE
FIGURE 2-12. USA BUILT MACHINES/DUAL FUEL INSTALLATIONS (GAS MACHINES ONLY)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref DUAL FUEL ENGINE COMPONENTS (FORD ENGINE
MACHINES)
Ref NOTE: For GM Engine Machines Refer to GM Engine
Installation.
2000174 Ref Prior to SN 0300065499 B
2000188 Ref SN 0300065499 to SN 0300073425 A
2000197 Ref SN 0300073425 to SN 0300124000 C
7023665 1 Dual Fuel Conversion Kit (Note: Includes hose, fittings, clamps
and items indented below. For replacement hose, fittings and
clamps supply locally.)
1 7022165 1 Mixer
7022171 1 Repair Kit - 7022165 Mixer
2 Not Used
3 7022167 1 Converter
7022170 1 Repair Kit - 7022167 Convertor
4 Use 7023680 1 Filter, LP Shut-Off (was p/n 7022169)
Use 7023680 1 Electrical Connector Kit (Includes (1) 2 Position Connector,
2 Pins & 2 Seals) (was p/n 7023679)
5 7022168 1 Valve, Solenoid
6 4360188 1 Switch, Vacuum
7 7023603 1 Adapter
7023659 1 Gasket
7023660 4 Screw M6 x 14mm
8 7022166 1 Adapter
Ref LP TANK AND BRACKETS INSTALLATIONS
0258033 Ref Standard Machines B
0271391 Ref Semi-Track Machines
(Not Shown - Located on Rear of Frame) A
100 1 Tank, LPG Options:
4400275 Aluminum Tank
4400420 Steel Tank
101 0100011 AR Compound, Locking
102 AR Angle, Support Options:
0181949 1 Angle, Support (Standard Machines)
4846259 2 Bracket, Support (Semi-Track Machines)
103 2 Bar, Mounting (Standard Machines Only)
0362519 Prior to SN 0300069274
Not Required SN 0300069274 to SN 0300124000
Not Required SN 1300000001 to SN 1300006000
104 0641607 4 Bolt 3/8in-16NC x 7/8in
105 1320218 1 Clamp, Spring (Standard Machines Only)
106 1 Clamp Kit Options:
1320220 Standard Machines
1320023 Semi-Track Machines
107 2180387 1 Fitting, LP
108 2180389 1 Fitting
109 2180504 1 Fitting, Elbow (Standard Machines Only)