JLG 450A_AJ Series II Parts Manual User Manual
Page 24
Advertising
1-16
SECTION 1 FRAME
250
2902400
1
Kingpin and Bushings Update Kit for Machines Built Prior to
SN 0300079126 & SN 1300000441(Includes Newer “SN
0300079126 & SN 1300000441 to SN 0300124000” Design
Items 202, 205, 210 and 222). Refer to Field Service Bulletin
AWP-04-11.
Ref
Note: Newer bushings will fit in “Prior to SN 0300079126 &
SN 1300000441” axles however if kingpin holes measure
1.503in diameter or larger in any direction, axle weldment
must be replaced before installation of kit.
Ref
Note: Spindles require drilling and tapping for 8 additional
kingpin mounting bolts. Newer design kingpins require 4
mounting bolts each.
FIGURE 1-3. AXLE AND STEERING INSTALLATION - 4WD (CONTINUED)
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Advertising