JLG 450A_AJ Series II Parts Manual - Manual (Page 287)

3121243 450A & 450AJ Series II 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION (USA BUILT MACHINES PRIOR TO SN 0300069155)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLIES (WITH GATE)
3510738 Ref 6ft (1.83m) with Standard Gate/No Mesh C
3510744 Ref 6ft (1.83m) with Standard Gate/Mesh to Top Rail D
3510742 Ref 6ft (1.83m) with Self-Closing Gate/No Mesh D
3510754 Ref 6ft (1.83m) with Self-Closing Gate/Mesh to Top Rail E
3510693 Ref 5ft (1.52m) with Standard Gate/No Mesh
(Prior to SN 0300065640) D
3510825 Ref 5ft (1.52m) with Standard Gate/No Mesh
(SN 0300065640 to SN 0300124000) A
3510779 Ref 4ft (1.22m) with Standard Gate/No Mesh A
3510780 Ref 4ft (1.22m) with Self-Closing Gate/No Mesh D
Ref Note: Replacement Decals Must Be Ordered Separately -
See DECAL SECTION.
1 Not Used
2 0100040 AR Sealant, RTV Silicone
3 Not Used
4 2080040 13 Fastener, Huck
5 2 Hinge Options:
2600216 Standard Gate
2600219 Self-Closing Gate
6 2940074 1 Latch
7 3311001 4 Nut #10-24NC
8 Not Used
9 See Note 1 Platform Weldment
(Note: Not Available Purchase Platform Assembly.)
10 3520072 3 Cap-Plug
11 3539685 1 Plate, Latch
12 3911008 4 Screw #10-24NC x 1in
13 4060803 6in/15cm Trim
14 4220165 1 Stop, Gate
15 Not Used
16 4751000 8 Flatwasher #10 Regular
17 1 Gate Weldment Options:
4845327 No Mesh/Standard Gate
4845951 Mesh to Top Rail/Standard Gate
4845426 No Mesh/Self-Closing Gate
4845951 Mesh to Top Rail/Self-Closing Gate
18 4761000 4 Lockwasher #10
19 3520172 2 Plug
0100010 AR Adhesive
Ref PLATFORM ASSEMBLIES (WITH LIFT BAR)
3510781 Ref 4ft (1.22m) A
3510716 Ref 6ft (1.83m) 1/B
51 0641418 2 Bolt 1/4in-20NC x 2-1/4in
52 Not Used
53 0961845 2 Bushing
54 3300151 2 Nut, Acorn 1/4-20NC