JLG 2658E3 Operator Manual User Manual
Models, Operation and safety manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operation and Safety Manual
- Section 1. SAFETY PRECAUTIONS
- 1.1 General
- 1.2 Pre-operation
- 1.3 Operation
- 1.4 Towing, Lifting, and Hauling
- 1.5 Additional Hazards / Safety
- Section 2. Machine preparation and inspection
- 2.1 General
- 2.2 Preparation For Use
- 2.3 Delivery and Frequent Inspection
- Handrail Assemblies
- Platform Assembly
- Sizzor Arms
- Electrical Cable
- Pivot Pins
- Lift Cylinder
- Frame
- Tire and Wheel Assemblies
- Sliding Wear Pad Blocks
- Hydraulic Oil Supply
- Steer Cylinder
- Steer Linkage
- Front Spindle Assemblies
- Control Boxes (Platform and Ground)
- Batteries
- Motor/Pump Unit and Valves
- Platform Placards
- 2.4 Daily Walk-Around Inspection
- 2.5 Daily Functional Check
- 2.6 Torque Requirements
- 2.7 Battery Charging
- Section 3. User Responsibilities and machine control
- Section 4. machine operation
- Section 5. EMERGENCY PROCEDURES
- Section 6. INSPECTION AND REPAIR LOG