I.R.I.S. IRIScan Anywhere 3 User Guide - Manual (Page 16)

Using the Scanner 13
NOTE:
• Always place the scanner on a flat surface for scanning. Do not
hold the scanner while scanning.
• Do not remove the memory card or USB flash drive (if
connected) while the indicators are blinking.
• This scanner is not guaranteed to be compatible with all USB
flash drives on the market.
• A fully charged battery can sustain up to 100 scans of A4/Letter
size plain paper at 300dpi. This is a factory test value for your
reference, and actual battery performance may vary.
• This scanner only supports output images in JPEG (.jpg) format,
and the date/ time attribute will not be added.
• For more information on how this scanner stores the scanned
image files on the memory card, refer to File Naming and
Storage Rules on page 17.
• If the memory space is nearly full (lower than 10MB), the Status
indicator blink (refer to Indicators on page 7). Use another card
or delete some files on it if necessary.
4. To power off the scanner after all originals
are scanned, press and hold the Power
button for 1 second until the indicators go
off.
NOTE : The scanner will automatically
power off if it is left idle for 5 minutes (if
not connected to a computer).