I.R.I.S. IRIScan Anywhere 3 User Guide - Manual (Page 18)

Using the Scanner 15
Connecting the Scanner to a Computer
By connecting the scanner to a computer, you can access the
scanned images on the memory card, USB flash drive and scanner’s
internal memory directly, or use the scanner as a memory card
reader, so that you can freely copy, paste or delete files using the
computer.
System Requirements
• Operating system: any operating system that supports USB mass
storage (e.g. Windows, Mac, Linux, Unix,...)
• USB port supported: USB 1.1 and 2.0.
1. Connect the mini end of the USB cable
(included with scanner) to the Mini USB
socket on the scanner.
2. Power on your computer, and then connect
the large end of the USB cable to a USB
port on your computer.
3. Press the Power button. The Power and
Status indicators blink.
NOTE : For more information on the
indicators, refer to Indicators on page
7.