I.R.I.S. IRIScan Anywhere 3 User Guide - Manual (Page 19)

Using the Scanner 16
4. The scanner will be recognized by the computer as removable
disks. When the Status indicator stops blinking, you are ready to
view and edit the files.
NOTE: Do not remove the memory card or USB flash drive
while the computer is accessing the files on them.
For Windows Vista Users
When the computer recognizes the scanner with an inserted SD
card or USB flash drive; a pop-up AutoPlay window will appear.
To view photos on the computer while scanning, change the
Windows Explorer setting as follows:
1. Check the Always do this for pictures checkbox.
2. Select Open folder to view files option.
For Windows XP Users
When the computer recognizes the scanner, with an inserted SD
card or USB flash drive, a pop-up window will appear. To view
photos on the computer while scanning, change the Windows
Explorer setting as follows:
1. Select Open folder to view files using Windows Explorer.
2. Select the Always do the selected action checkbox.
For Macintosh Users
When the computer recognizes the scanner with an inserted SD
card or USB flash drive, the volume icon will appear on the
desktop. To view the contents, double-click the icon to open a
Finder window.
5. To safely disconnect the scanner from the computer:
For Windows Users
a. On Windows System Tray, click the hardware removal icon as
indicated below.
b. Click to select the Safely remove USB Mass Storage Device
option that appears.
c. When the following message is displayed on-screen, you can
safely unplug the scanner from your computer.
Hardware removal icon