Google Earth User Guide - Manual (Page 86)

available layers from the WMS you choose.
5. Choose the appropriate layer(s) and click Add -> to add the layer(s) to the
Selected Layers field. This places this information in the WMS image
overlay you will see in Google Earth. To remove a layer from the Selected
Layers field, select it and click <-Remove.
6. To set the order of selected layers as they appear in the 3D viewer, select
the appropriate layers in the Selected Layers field and click Move Up or
Move Down.
7. When you are finished, click OK and continue from Step 3 of Creating an
Image Overlay .
Placing Google SketchUp 3D Models
To place a Google SketchUp 3D model in Google Earth:
1. Click Add > Model or press Ctrl + Shift + M ( + Shift + M on the Mac).
The New Model dialog box appears. Adding a model is very similiar to
adding a placemark .
2. Altitude settings for 3D models are identical to placemark altitude settings.
For more information, see Setting Altitude .
For additional information:
●
Viewing Google SketchUp 3D Models
●
Using Google SketchUp with Google Earth
©2007 Google - Privacy Policy - Terms and Conditions - About Google