IOGear GCN1000 - Manual (Page 25)

25
Contact
7. This brings you to the GCN1000 main screen
Using The Windows Client
1. After you log in, click the Windows Client icon on the left of the web page.
Note: You must have DirectX 7.0 or higher installed on you computer.
Note: If you are using Internet Explorer 6 or above a box similar to the one below opens when connection
to the GCN1000 has been established
Some browsers may not allow the client to run directly in their window
in those cases, you will be asked to “Save to disk”. Allow it to download to a convenient location, then,
with the browser still open, double click on the down loaded application , a box similar to the one below
opens. There is nothing actually installed on your computer, the application is merely run from your
computer (instead of directly through the browser). In keeping with the security provisions above, if you
use the “Save to disk” method, each time you use the Windows client a fresh copy of the program will be
down loaded.
2. When a connection to the GCN1000 has been established, a screen similar to the one below appears: