Installation of ion™ drive software (mac) – IOGear GHE125C User Manual
Page 25
23
Installation of ION™ Drive Software (Mac)
For Mac OS X Users Only
• Open
Combo ION Drive
Folder
• Open Mac OS 10 folder that corresponds to your OSX installation. Either 10.1.X for 10.1.5 or before or choose
10.2.X for 10.2 or later.
• Double click on
GHE125C Installer.pkg
• Enter Administrator Password and click
OK.
• Click
Continue
when prompted
• Again, click
Continue
when prompted
• Select Destination. Make sure to choose the partition that has your OS X installation on it. Then click
OK.
• Now click
Next
at the next screen.
• The computer will prompt you that the installation will require a reboot. Click
Continue Installation.
• After installation completes click on
Restart
and computer reboots. When boot is complete the drive is ready to
be attached and used.