IOGear GMD2025U120A Manual User Manual
Page 27
26
27
SD INTERLACE
When connecting to a TV equipped with Y/Cb/Cr video input.
SD
PROGRESSIVE
When connecting to a TV equipped with Y/Pb/Pr video input. Enabling this option will
make
VIDEO OUTPUT options disabled.
720P
When connecting to a TV supports high definition video input, enabling this option will
output a 16:9 up-scaling component video format for High Definition displays.
Enabling this option will make
TV STANDARD / TV DISPLAY / VIDEO OUTPUT
options disabled, and the DVD/JPEG
ZOOM function will also be disabled at this mode.
Note
You’ll have to exit the
•
SETUP MENU for these settings to take place.
By holding and then pressing
•
MENU button on the remote control, or pressing
the button on the keypad, the video output format can be switched in the following
sequence:
720p SD PROGRESSIVE SD INTERLACE NTSC / PAL (toggle)
and so on. If you find the display incorrect, try this method to get back to standard
NTSC or PAL video output, and then configure the video setup correct.
COMPONENT OUTPUT
After Exiting the settings, choose the movie folder that you want by using the up and down
arrows on your remote. Press Play to View.