IOGear GMD2025U120A Manual - Manual (Page 32)

32 33
If your remote control stops working you may need to replace the included battery. Your remote uses
a standard button battery, model CR2025. To open the battery tray you will need to slide the locking
mechanism down and then pull out on the tray simultaneously. The replacement battery should be placed
into the tray with the positive side facing up. Then slide the tray back into the remote until you hear the
locking mechanism click.
Replacing the remote battery
+
CR2025
3V
+
CR2025
3V
+
CR2025
3V