IOGear GWHD11 - Manual (Page 8)

7
Select Transmitter Number:
→ GWHD11
→ GWHDSTX
SETUP
5. After the pairing is complete, both the transmitter and receiver
will re-boot and establish the link to each other automatically
within 5 seconds.
1. If the transmitter and receiver lose their linked connection,
follow the steps for Pairing Additional Transmitter to
re-establish the connection.
If more than one transmitter is linked to the receiver, use the
following steps below to modify a transmitter’s name:
1. Press Transmitter No. to display the list of linked transmitters.
3. Select Modify Transmitter Name option to change a
transmitter’s name.
2. Select SETUP menu by using the Up / Down buttons;
press OK to select.
Modifying Transmitter Name
SETUP:
→ Add New Transmitter
→ Remove Transmitter
→ Modify Transmitter Name
 Return
Select Transmitter Number:
→ GWHD11
→ GWHDSTX
SETUP