Switching between wireless hdmi transmitters – IOGear GWHD11 User Manual
Page 9
8
Select Transmitter Number:
→ GWHD11
→ GWHDSTX
SETUP
Edit Transmitter name:
→ GWHD11
→ GWHDSTX
Return
3. Select
Modify Transmitter Name option to change a
transmitter’s name.
1. Press the
Transmitter No. button. The OSD will show a
list of transmitters linked to the receiver.
2. Use the
Up / Down buttons to select the transmitter you
want to display on your HDTV / HD projector. Then press
OK and allow ~10-12 seconds for the receiver and
transmitter to re-establish a connection.
4. Use the
Up / Down buttons to select the transmitter you
want to modify.
5. Then use the
Up / Down buttons on the remote to select
alphanumeric characters; use the
Left / Right buttons on the
remote to move the cursor; Press
IR button to backspace.
Switching between Wireless HDMI Transmitters
Edit Transmitter name:
→ GWHDSTX
Return IR Key=Delete
= A~Z+0~9
= cursor