Echo SRM-225U Serial S79012001001 - S79012004905 - Manual (Page 14)

14
balance and adjust unIt
1. Loosen harness clamp screw.
2. Put on harness and attach unit to harness.
3. Slide harness clamp up (A) or down until unit balances with head
approximately 50-75 mm (2 -3 in.) from the ground.
4. Tighten harness clamp screw.
5. Loosen upper U-Handle clamp screws (B), and position U-Handle
for comfortable operation.
6. Tighten U-Handle clamp screws and 8 mm clamp bolt securely.
A
B
5. Secure ignition leads against engine housing with clips (H,I).
6. Install air filter and cover.
H
I
H