Echo SRM-225U Serial S79012001001 - S79012004905 - Manual (Page 34)

34
s
pecIfIcatIons
MODEL ---------------------------------------------------- SRM-225U
Length ------------------------------------------------------- 1793 mm (70.6 in.)
Width -------------------------------------------------------- 700 mm (27.5 in.)
Height ------------------------------------------------------- 510 mm (20.1 in.)
Weight (dry) w/Cutter Head ------------------------------ 5.98 kg (13.2 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust ------------------------------------------------------ Spark arrestor muffler or spark arrestor muffler with catalyst
Carburetor--------------------------------------------------- Zama diaphragm w/purge pump
Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge ignition type
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ---------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and
J.A.S.O. M345- FC/FD, two-stroke, air-cooled engine oil.
Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
alternative fuels such as E-15 or E-85.
Oil ------------------------------------------------------------ Power Blend X TM Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.44 lit. (14.9 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch-------------------------------------------------------- Centrifugal Type
Vibration Isolated System -------------------------------- Rubber cushion on engine mount (heavy duty). Rubber grip on
front handle.
Operating Rod ---------------------------------------------- 25.0 mm aluminum Tube
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) flexible shaft
Gear Case Ratio -------------------------------------------- 1.4:1 Reduction
Rotating Direction ----------------------------------------- Counter Clockwise; viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™ Line capacity
7m (24 ft.)
Handle ------------------------------------------------------- U-Handle
Shoulder Harness ------------------------------------------ Standard
Idle Speed --------------------------------------------------- 2,750 - 3,000 RPM
Clutch Engagement Speed -------------------------------- 3,800 RPM
Wide Open Throttle Speed (W.O.T.)
with Nylon Line Head ------------------------------------- 8,400 - 10,200 RPM
Wide Open Throttle Speed (W.O.T.)
with Blade -------------------------------------------------- 10,000 - 11,500 RPM