Echo CH6614 Owners Manual v.1 - Manual (Page 14)

6 INCH CHIPPER 12
1. engine fuel tank: use unleaded fuel–do not mix with
oil.
2. Trailer hitch: always use 2 inch ball and safety
chains.
3. Jack stand: always have in uP position and clear from
ground when moving. When in use, place in DOWN
position on a level surface.
4. engine drive belts and shield: Never remove shields
when in use.
5. chipper chute: Feed materials to be chipped through
the chute.
6. engine: See engine controls on next page.
3.1 conTrols
Figure 3.1, 6 inch chipper controls
Section
conTrols and oPeraTion
3
7. rotor access cover: Remove to expose chipper
blades.
8. engine battery: (Not included)
9. rotor shaft bearing cover: Covers rotor shaft and
front bearing.
10. adjustable chipping anvil: Changes the size of the
chips.
11. belt engagement pedal: When the pedal is de-
pressed, the drive belt is disengaged. When the pedal
is released, the drive belt is engaged.
12. Turntable foot pedal: used to pivot machine 360
degrees on the trailer.