Echo EA-410 - Manual (Page 14)

14 X7504220703
© 10/2013 ECHO Inc.
ASSEMBLY EA-410
ASSEMBLY
Throttle Handle Assembly
1. Cut and remove one (1) white plastic shipping tie that
secures handle assembly to packing materials.
Note: DO NOT cut or remove black plastic ties.
2. Remove mounting screw and hex nut from throttle handle
assembly, and slide throttle handle onto mounting bar.
3. Align hole in throttle handle assembly with hole in bar.
4. Secure throttle handle to bar with screw and hex nut.
5. Tighten securely.
Auger Installation
1. Carefully place engine on a flat surface with muffler side
down.
2. Remove assembly hardware from auger.
3. Slide auger assembly onto gear case PTO shaft.
4. Align PTO shaft mounting hole with auger mounting hole.
5. Secure auger to PTO shaft with hardware provided, and
tighten securely.
Note: Six, 8, & 10 in. Earth Augers hardware style shown in
illustration. Two, 3, & 4 in. Earth augers and 8 & 10 in. Ice
Augers use socket head screws only.
Parts Required: Throttle Handle Assembly, Screw, Hex nut.
Parts Required: Auger Blade Assembly - Includes: 6 - 10 in. Earth
Auger: 3/8-16 x 1- 1/2" Bolt, 3/8-16 Hex Nut,
2 - 4 in. Earth Augers: 3/8-16 x 1- 1/4" Socket
Head Screw, 8 - 10 in. Ice Augers: 3/8-16 x
1- 1/4" Socket Head Screw