Echo EA-410 - Manual (Page 15)

EA-410 ASSEMBLY
© 10/2013 ECHO Inc.
X7504220703 15
Auger Extension
The muffler and area around the muffler may be extremely
hot. Avoid contact with this area, otherwise serious injury
may result.
Never operate auger with handles above chest height,
otherwise you could lose control, resulting in serious
personal injury.
1. Drill hole into ground 15 to 20 in. deep. Stop engine, and
clean off auger mounting bolt hardware.
2. Remove auger mounting hardware. Lift engine off auger,
and set aside. The engine should be supported on the
ground by the handles and PTO shaft.
3. Remove extension hardware.
4. Slide extension onto auger shaft, align holes, and install
mounting hardware. Tighten securely.
5. Install engine on extension shaft, and secure with hardware
removed in step 2. Tighten securely.
Parts Required: Auger Extension, 12 or 18 in. Includes
assembly hardware.