ACU-RITE CSS I/O Users Manual - Manual (Page 10)

8 I Operating Instructions
I - 2 Spindle Speed Contr
o
l (RPM)
I - 2 Spindle Speed Control (RPM)
Milling Systems
The Mill Spindle Speed Control is for milling systems only, and
provides an open loop spindle speed control.
„ The spindle speed control requires the CSS I/O box.
8 Define the last axis as a rotary encoder axis.
Display
8 Define the display as a speed display.
The spindle speed control is only available for milling
systems. If the DRO is configured for a turning system,
then no Spindle Settings will be displayed.