ACU-RITE CSS I/O Users Manual - Manual (Page 13)

CSS I/O 11
I - 2 Spindle Speed Contr
o
l (RPM)
Voltage / RPM Setup
The voltage setup fields are used to establish the relationship
between the DAC output signal (0 - 10 V), and the spindle speed for
each gear.
8 Enter min, and max voltage levels for each gear.
8 Press ENTER to save the settings, and exit the form, or press the C
key to exit without saving the changes.
This screen allows the spindle to have min, and max RPM settings
defined. This limits the spindle not to exceed the limits set at start up.
The spindle speed can then be manually increment above the “Run
Time” limits.
8 After selecting Spindle Settings from the Installation Setup menu,
use the RIGHT or LEFT arrow hard keys to scroll to this menu.