ACU-RITE CSS I/O Users Manual - Manual (Page 14)

12 I Operating Instructions
I - 2 Spindle Speed Contr
o
l (RPM)
Operation / Job Execution
The operation of the Mill Spindle is associated with the use of the
selected tool from the tool table, and the spindle parameters for
running the tool.
Refer to the DRO User’s Manual for setting up, and using a tool from
the tool table.
8 Select the desired tool from the tool table.
8 Press ENTER to open the tool setup form.
Press the RPM calc key to specify a surface speed, and get a resultant
RPM spindle speed that is automatically loaded into the tool table
when exiting the RPM calc.