ADS-TEC TT13 User Manual - Manual (Page 19)

Tablet PCs TT13
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
19
B ATTERY STATUS REPLACEMENT
The TT13 batteries can be removed by using a mechanical ejector on the back of the
device.
The batteries status can be retrieved by pushing a button on the batteries. The batteries
display will light up for a few seconds and show the current batteries charge status on a
scale from 0 to 100. If the display lights red, this represents a weak battery. If the display
is green, it shows that the battery is fully charged. If the device is in operating mode, the
battery status can be retrieved by using the supplied Battery Information & Diagnostics
Tool.
Note:
The "Hardware specific software” chapter describes the Battery Information &
Diagnostics Tool, which can be used for retrieving the accumulator status while operating
the unit.