ADS-TEC TT13 User Manual - Manual (Page 31)

Tablet PCs TT13
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
31
6.3 TT13 W IRELESS K ONFIGURATION
Hinweis:
The application is intended to activate/ deactivate the whole hardware in the device,
which is intended for wireless data communication.
Die Anwendung dient zur kompletten Aktivierung / Deaktivierung der Hardware im Gerät,
welche für drahtlose Datenkommunikation dient.
Depending on your device configuration the power off of the following hardware is
allowed:
WLAN
Bluetooth
UMTS
RFID
B
LUETOOTH
If a Bluetooth module is available, the Bluetooth class can be switched. With Class 1, a
range of max. 100m open air can be reached, while Class 2 is limited to a range of 10m.
After changing the Bluetooth Class it is mandatory necessary to reebot the device,
because the changes will only take effect after rebooting the device.
The Switch as well as the activation and deactivation of the separate components can take
several seconds.
If the option “Controlled by Bios” in Advaned/Firmware is Enabled, the bios is able to
activate or deactivate the several hardware components depending on the configuration in
the Bios. The selected settings for the wireless configuration in Windows will be
overwritten. For usage of the Wireless configuration, it is recommended to set the option
Controlled by BIOS to Disabled.
Note:
The application can be started in the control panel after installation.